stainlesskb afa's Album: Stainless Steel Sink Manufacturers

The sink is the soul of the kitchen. It has a lot of meaning. It is very important to choose a quality sink. Then let's take a look at the Stainless Steel Sink Manufacturers to see how to choose the right sink. Pay attention when purchasing the sink: 1. Welding is tight and there is no solder joint. Welding quality is one of the most critical factors affecting the life of the water tank. It is welded well to prevent rust and desoldering. Generally, the water tank needs to have an overflow device. The bottom of the basin needs to be oiled, and the surface looks fine. 2. Environmental sanitation, easy to clean, and good flatness. The most intuitive standard for determining quality and grade is: gloss, oil-proof, and no smudge after washing the basin. Material anti-fouling is a priority when purchasing a sink; 3. The bottom of the basin should be 1mm thick. The water pipe is leakproof, the precision of the fittings and the accuracy of the water tank are the same. The hard PP/PVc material has the same life, anti-clogging and no water leakage. Generally, the thickness of the water tank is 0.8 ∽ 1 mm, and the mass of 1 mm is relatively good. ### This is generally 50-60cm away from the ground, and finally it is necessary to use a hose to connect, a little deviation is not a problem. information about Stainless Steel Sink Manufacturers : https://www.afastainlesskb.com/product/stainless-steel-sink/